|
Concentrating equipment  Feeders FeedersDisc feeders DT and shaking feeders PK are applied for constant supply of bulk and graded material ( with the bulk weight of 1-2t/м3 for PK and 2,5 t/м3 for DT) from bunkers, cones and other tanks to technological machines.
The feeders are distinguished for their reliability and longevity.
Upon customers' request the feeders can be equipped with a frequency regulator for induction motors (instead of direct-current drive) to provide a frequency infinitely variable control (for DT) or a double-stoke frequency (for PK)
Modernization of feeders.
| Total position in category: 5 |
|
|
DТ-20А
|
|
|
|
|
|
Disk feeder, which is designed for uniform output from bunkers, funnels and other reservoirs of lump and granular materials with volumetric mass of bulk material of 2-2,5 t/m3.
|
|
| |
|
|
|
|
DТ-31А
|
|
|
|
|
|
Disk feeder, which is designed for uniform output from bunkers, funnels and other reservoirs of lump and granular materials with volumetric mass of bulk material of 2-2,5 t/m3.
|
|
| |
|
|
| |
|
|
DТ-25А
|
|
|
|
|
|
Disk feeder, which is designed for uniform output from bunkers, funnels and other reservoirs of lump and granular materials with volumetric mass of bulk material of 2-2,5 t/m3.
|
|
| |
|
|
|
|
PV-PBR-1,2/2,7
|
|
|
|
|
|
It is specified for discharging of cobbed (up to 500 mm) bulk materials with the angle of natural slope not less than 44º, not susceptible for adhesion from bunkers and other accumulating reservoirs within the temperature range from -20Cº to +5
|
|
| |
|
|
|
|
